Introduction to automobile leaf spring
As we know, the elastic components of the independent suspension of passenger cars mostly use coil springs, and the elastic components of non-independent suspension mostly use leaf springs. Because of the simple steel structure and reliable use, leaf springs are widely used, such as some off-road vehicles, pickups or vans. However, most buses and trucks use leaf springs.
As the name suggests, leaf springs are made of steel plates, which are also called leaf springs. In order to make full use of the material, the leaf spring is made into a form close to the stress beam. It has two types, one is equal thickness, the width is narrow at both ends and wide in the middle. The traditional multi-piece leaf spring is of this type. This type of leaf spring is composed of multiple steel plates with different lengths and the same width. Nowadays, most buses and trucks use this type of leaf spring.
The other is equal width, the thickness is thin at both ends and thick in the middle. The common small-leaf leaf spring is of this type. The small-leaf leaf spring refers to a variable-section leaf spring with only 1 to 4 pieces. The variable-section leaf spring refers to the thickness of the center along the length of the steel plate and gradually thinner at both ends, or Leaf spring with gradual change in width and thickness. It is mostly used in light vehicles, and now some large and medium passenger cars tend to use this type of leaf spring.
The middle part of the leaf spring is fixed on the axle by U-shaped bolts (also called riding bolts), and the curling lugs at both ends are hinged on the bracket of the frame with pins. In this way, the axle and the body are connected by the leaf springs, which play the role of buffering, damping, and transmitting force. The steel plates of the multiple leaf springs are superimposed into an inverted triangle shape. The uppermost steel plate is the longest and the lowermost steel plate is the shortest. The number of steel plates is related to the weight of the car and the shock absorption effect. The more steel plates, the thicker and shorter. The more rigid the alloy spring.
However, when the leaf spring flexes, the pieces will slide and rub against each other to generate noise. Friction can also cause spring deformation, causing uneven driving. Therefore, in cars with low load capacity, few leaf springs appear to eliminate the defects of multiple leaf springs.
Some small-leaf leaf springs only use one leaf spring. Compared with multiple leaf springs, in addition to reducing noise and no friction, they can also save materials, reduce weight, facilitate layout, reduce the height of the vehicle, and have good ride comfort.
The section of the steel plate of the small leaf spring changes greatly, and the section from the middle to the two ends is gradually different, so the rolling process is more complicated. In order to reduce the weight and the difficulty of the rolling process, a fiber reinforced plastic (FRP) has appeared in recent years to replace the steel plate, which can reduce the weight by more than half. This fiber-reinforced plastic is made of glass fibers and polymerized together with polyester resin.
According to calculations, the weight of a general single leaf spring is about 11-20 kilograms, and the weight of each pair of fiber-reinforced plastic springs is about 4 kilograms, and the driving is stable and the noise is very low.