Maximum repair thickness: Please pay attention to the difference between the maximum thickness of a single layer and the maximum thickness of a single point, the maximum welding thickness and the maximum reliable welding thickness.
Single layer and single point: The principle of cold welding repair is similar to resistance welding. When there is only one solder joint, since there is no shunt around the solder joint, the output power is the most concentrated and the thickness that can be welded is the largest. But in general repair work, it is definitely necessary to repair a face. When repairing a surface, there are other solder joints around each solder joint (except the first solder joint) to divert the output power, and the thickness of reliable soldering is bound to be reduced. Generally, to judge the power of the repair machine, it is recommended to use the reliable welding thickness of a single layer as the standard. All the data in our company’s manual are the data of single-layer reliable welding.
This article is provided by the Machinery Knowledge Network, please pay attention to the content provided by the Machinery Knowledge Network
This article is provided by the Machinery Knowledge Network, please pay attention to the content provided by the Machinery Knowledge Network
Maximum welding thickness and maximum reliable welding thickness: The welding of the material is not equivalent to the welding. As a repair machine, the welded material must be completely welded to the workpiece (that is, reliable welding), otherwise, the repairing material will easily fall off in the later processing and use. All the data in our company’s manual are the data of single-layer reliable welding